Publicité
Les langues disponibles
Les langues disponibles
Usage
The product is intended for lifting vehicles. The relevant technical data of the lift must be observed.
1. Preparation
a.
Carefully read all the safety instructions before operating the lift.
b. Check the ground clearance of the vehicle to ensure that no parts come into contact with
the platform when it is being placed.
c. Place the vehicle in the middle of the lift. Pay attention to the load distribution.
d. Fix the vehicle on the platform. Appropriate wheel clamps or tension belts are to be used for
this.
2. Lifting
a. Switch on the lift using the main switch.
b. Raise the vehicle to a height of 100-150mm and stop lifting by releasing the lift button.
c. Check whether the vehicle is safely on the lift.
d. Then continue to lift and observe the lifting process.
3. Lowering
a. Before lowering, check whether there are any objects under the vehicle or the lift.
b. Press the lower button, the lift lowers completely.
4. Driving Out
a. Remove the fixings and secure the vehicle against tipping over.
b. Drive out the vehicle.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-02
Manufacturer ATH-Heinl GmbH & CO.KG
- 10 -
Publicité
