Publicité
Les langues disponibles
Les langues disponibles
Pneumatic wheel clamping
1. Position the front wheel between the clamping device
2. Drive the motorcycle on the lift until the front wheel it actuates the wheel clamping device by
pressing the lever
Now the pneumatic cylinders begin to press the clamping plate against the wheel and thereby
tension it.
Before getting off, check again whether the motorcycle has been securely locked and fold the side
or main stand down.
3. For safety purpose, this clamping device can be locked by turning the handwheel-screw
clockwise direction in case of the air failure.
4. The motorcycle must be fastened with straps to the holes
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2022-02
.
Manufacturer ATH-Heinl GmbH & CO.KG
.
on the platforms of the lift.
- 7 -
in
Publicité
