Table des Matières
Publicité
6.2- Risk following intentional acts of persons other than the user
6.3 - Cleaning
Cleaning the door must also include cleaning of the floor.
The equipment should be cleaned using cleaning agents that are compatible with the materials of the supplied
product. For the dilution percentages, refer to the instructions of the cleaning agents to be used.
Materials :
- Composite : lever cap, plate, internal butt
- Rubber : black cap
- Anodized aluminium for lever
7 - MAINTENANCE
The final user must carry out periodical yearly or twice-yearly checks, or have them carried out, with keeping of a
maintenance register (In France : D. Safety at work - 89/655/EEC modified 95/63/EEC - art. 4b / CT R 233-
1-2 and R 233-11-1).
Maintenance must be carried out by qualified staff.
When replacing a component, choose the right component from the manufacturer's after-sales service, and respect
the instructions of the different sections in this instruction manual.
Whatch the consumable parts
consumable parts
upper part of internal lever
internal black handle
8 - SCRAPPING
Take all the European and national regulation texts into consideration, which deal with scrapping and packaging
waste. Example: Directive relating to scrapping, 75/442/CEE.
Scrapping of the following items required dismounting and waste to a special center .
These materials give off harmful vapors during combustion.
"Crushing of fingers placed between internal frame butt (D23)
and upper part of internal lever (PA1)
:
periodicity of maintenance
internal butt
designation
black handle
yearly
yearly
yearly
ref
PA1
- 12 -
criteria for scrapping
Fissure
Fissure, material missing
Fissure
material
SBR
NMPOIG8530-D
Publicité
Table des Matières
