Recycling Instructions - SCAN domestic KK 501 Manuel De L'utilisateur

After having acquires this cabinet, read the recommendations
carefully and always keep them within easy reach.
A suitable installation and a rational use in accordance with these
recommendations will make it possible to obtain more profitable
use of the cabinet.
KK 501 and KK 601 models - cooling and preservation of fresh
produce and drinks.

Recycling instructions

Recycling of packaging
The packaging, protect the cabinet during the carriage. The ma-
terial used are reused.
Help us to protect the environment and recycling the packaging,
contact the municipal services to obtain information's how to
proceed.
Be careful with the place storage of packaging material, it must
be away from the children, trying to put them in places of recy-
cling.
Recycling of used equipments
This appliance is labeled in accordance with European Directive
2002/96/CE concerning used electrical and electronic appliances
(waste electrical and electronic equipment – WEEA). The guide-
line determines the framework for the return and recycling of
used appliances as applicable throughout the EU.
The appliance is not without value and must not be treated as an
ordinary domestic waste. Remove them in an environmentally
responsible will recover valuable raw materials.
ADVICE!
In equipments out of service must:
- Disconnect the cabinet.
- Cut the electric cabe and move them away from the equip-
ment like the power plug.
- The cooling equipments have refrigerant fluid, it must be
correctly eliminate.
Be careful for don't damage the tube where circulate the cooling
fluid, until your recycling.
Safety instructions and warming
After having acquires this cabinet, read the recommendations
carefully and always keep them within easy reach.
Must keep the instructions in a safe place and accessible to the
user, the instructions manual have important information's like
the installation, utilization and maintenance of the equipment.
Save all the documentation for utilization or for other person who
will adquire the equipment.
Technical Safety
This cabinet has a litle quantity of refrigerant fluid (R600a) not
pollutant, but inflammable.
Must be careful for don't damage the tube where circulate the
refrigerant fluid during the carriage or installation. The refrigerant
fluid can escape and cause damage on the eyes.
In case of damage:
• Must keep the cabinet away from the flames
• Ventilate the cabinet for a few minutes
• Disconnect the cabinet
• Contact the technical services.
The room where the equipment should be installed must be big-
ger than the quantity of refrigerant fluid the equipment. In small
places and in occurrence of a leak, can form a mixture of gas
inflammable.
For each 8g the refrigerant fluid, the room must be at least 1m3.
The quantity of fluid refrigerant is in the characteristic plate of the
equipment, inside the cabinet.
The maintenance operations must be done by the manufacturer,
its service agent or similarly qualified persons in order to avoid
hazard.
Recomendattions for use
• Before connecting the cabinet, check whether there as been
any damage to the cable and plug during transport.
• This device belongs to climatic class 3 (indicated in the plate
of characteristics) for what the allowable room temperature
in which the device should function will have to be between
+16 ºC and +32º C.
• Do not touch the cabinet with wet or damp hands or feet.
• This device is not foreseen to be used by people (including
children) whose physical capacities, sensorial or mental are
reduced, or people with lack of experience or knowledge,
except if they will be able to benefit, through a responsible
person for its security, of a monitoring or previous instruc-
tions relative to the use of the device.
• Never disconnect the cabinet from the power point by pull-
ing the power cable. Use the ribbed area to grip the plug.
• Never use electronic device inside this device (warmer...)
Danger of explosion.
• Never use mechanical devices for accelerate de defrosting,
different than recommended by the manufacturer. (e.g.
Defrosting or cleaning the equipment with a steam cleaner!
The steam could reach the electric elements and cause short
circuit. Danger of electric shock.
• For defrosting and cleaning, must disconnect the cabinet.
• Don't use sharps objects for eliminate ice, this action could
damage the tube where circulates the cooling fluid. The
cooling fluid could be in fire and cause injuries on the eyes.
• Don't save inside the equipment products with propeller gas
(e.g spays tin) and explosive products. Danger of explosion.
• Don't use drawers, doors like support zone.
• Alcohol of high percentage just must be save inside the
equipment if him was save in container hermetically close
and in upright position.
7