Publicité
Les langues disponibles
Les langues disponibles
Main components
1. Pillars
The inside lifting-carriage is lifted by hydraulic cylinder due a chain to the top.
2. Hydraulic-Aggregate
The hydraulic oil is pumped to the hydraulic cylinders by a gear wheel pump actuated by an electrical motor.
Over a lowering valve the hydraulic oil will be returned in the oil tank..
3. Lifting arms
Due the lifting arms the cars could be lifted.
4a. Cross beam ATH-Comfort Lift 2.xx Over driving
metallic cover protects the synchronization ropes and
the hydraulic hose
Safety devices
5. Control box from the main column equipped with Deadman's Type Controls
Includes the complete electrical control system. All the push buttons are protected by a front ring and the
operator is required to hold the controls in the engaged position to rise or lower the lift in case of releasing
operation is immediately interrupted.
5'. Control box from the opposite column
6. Automatic Arm Restraint
To prevent swinging motions of arms when vehicle is on lift when the carriage is rising up.
Locked position of the lifting arms:
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-04
4b. Cross beam
ATH-Comfort Lift 2.xx XL
4b'. Reinforcing profile for Cross beam
Manufacturer ATH-Heinl GmbH & CO.KG
- 5 -
Unlocked position of the lifting arms:
Publicité
