aerauliqa QD Manuel D'instructions page 7

Turn the trimmer HY completely clockwise and the humidistat function is deactivated.
Automatic humidistat operation: connected according to the diagram in fig. 13C, when the percentage of
Relative Humidity exceeds the pre-set intervention threshold, the fan starts up automatically. When the
percentage of Relative Humidity goes below the threshold, the fan continues to function for a pre-set period
of time.
Operation with switch connection: connected according to the diagram in fig. 13C, after the light is switched
on, the fan activates with a delay of aprox. 1.5 seconds. After it is switched off, the fan continues to function
for a pre-set period of time.
Attention: When the relative humidity level is higher than the pre-set threshold, automatic operation with
humidistat has priority over manual operation, or rather the fan cannot be stopped via switch.
7