Publicité
Les langues disponibles
Les langues disponibles
LOADING AND UNLOADING
WARNING
An improperly loaded or unloaded le
cabinet can become unstable or tip over,
causing serious injury.
Loading:
1. Check cabinet for proper adjustment and stability.
2. Load bottom drawer rst to increase stability.
3. Distribute contents and weight evenly among remaining drawers.
4. Check to see if cabinet is stable after loading is complete (on
carpeted surfaces, settling may occur). If necessary, empty
cabinet completely, then readjust glides.
Unloading:
1. Remove contents from top drawer rst.
2. Remove contents from bottom drawer last.
If misused, this le cabinet can become
WARNING
unstable or tip over, causing serious
injury. To help prevent accidents, follow
the instructions below.
•
Do not stand or lean on an open drawer.
•
Do not put materials on an open drawer. Use posting shelf or
table to sort or collate
•
If this cabinet ever seems unstable, do not use it.
checked for proper leveling and loading. Have any problems
corrected immediately.
•
This cabinet has an interlock to prevent opening more than
one drawer at a time. Do not try to defeat this interlock.
•
These les are for storing and ling non-combustible materials
that do not require special protection. Do not use this cabinet to
store combustible or hazardous materials.
WARNING
If not properly secured when moving,
this le cabinet can become unstable or
tip over, causing serious injury.
Before moving cabinet:
1. Unload contents. (Unload from the top. See loading and
unloading above.)
2. Secure the unit:
• Close and lock the cabinet.
• Use furniture straps and appropriate moving equipment.
3. After positioning cabinet in new location, follow instructions for
adjusting and installing.
No. 15224 2/4
10-2011
OPERATING
Have it
RELOCATING
There are two hanging folder frames per drawer.
Recommended ling positions are as follows:
Positions 1 & 2 - Letter ling (side-to-side)
Positions 1 & 4 - Legal ling (side-to-side)
Load
Positions 1 & 3 - A4 ling (side-to-side)
Unload
Position number
Ribs must
face away from
ling system
1. Hanging folder frames must be in Positions 1 & 4 as shown.
2. Position hanging le racks on front and rear hanging folder
frames for each bank of le folders. Side of drawer/shelf
should be used for outermost side of folders.
Position number
No. 15224 3/4
HANGING FOLDER FRAMES
4
3
2
1
Front of drawer/shelf
OPTIONAL FRONT-TO-BACK FILING
Double rail hanging le rack
4
3
2
1
Front of drawer/shelf
Hanging folder frames
Publicité
