NewTom GIANO Prescriptions De Sécurité Et Instructions Pour L'opérateur page 48

Err.0.31: "USB key not found" => the key has not been inserted properly or has not been recognised by the device. Try
reinserting the key and repeat the procedure. If the error persists, change the key with a compatible one (see the list
at the end of this chapter).
Err.0.32: "USB error on writing" => the key is corrupted, incompatible, write-protected, or there is insufficient free space.
Retry the saving procedure and if the error persists, check that the key is not write-protected and that there is sufficient
space, then retry. If necessary, replace the key with a compatible one.
Listed below are the USB keys that have been tested for compatibility with the device:
- Sandisk Cruzer 4GB,
- Sandisk Cruzer 8GB,
- Sandisk Cruzer 16GB,
- Kingston Traveler 16GB,
- Kingston Traveler 32GB.
8. CONTROL CONSOLE
The upper part of the console onboard the machine consists of a colour touch screen. The user interacts with the
display by tapping graphic icons with selection button functions. The intuitive operator interface makes it easy for the
operator to select the settings necessary to start the examination.
8.1. LANGUAGE SELECTION
When the system is turned on, the FAVOURITES home page is displayed.
If a different page is displayed, go to the HOME page by tapping the button
Tap the icon to access the CONSOLE CONFIGURATION menu.
Tap the icon to access LANGUAGE selection where you can select a language from those available by
tapping the icon depicting the country.
48
A PNG image will be saved on the USB key, which needs
to be dragged to NNT in order to be viewed correctly.
OPERATOR'S MANUAL
.
EN