KBL megaSun Optima Mode D'emploi page 33

The easyCare menu item is only available with CPI
Energy and intelliSun sunbeds that are connected to
an easyCare system.
EASYCARE
SETTINGS
> press ENTER
Submenu SETTINGS.
Invoked by pressing
START (ENTER).
easyCare mode only (EConly)
man. time confi g (T.Display)
easyCare tanning time
Adjust
Set value quicktest
Melanin min value
Melanin min runtime
EASYCARE\SETTINGS
easyCare mode only (eonly)
>
> on-US
> on
> off
If this function is active, the tanning session is strict-
ly carried out on the basis of the values determined
by the easyCare system. The adjustment „on-US"
is required for operation in the United States.
Factory setting: Depending on the operator country
EASYCARE\SETTINGS
man. time config (TDispl.)
>
> on
> off
If this function is active, the tanning time can be
entered at the easyCare unit. The tanning power will
be adapted automatically.
Factory setting: off
All manuals and user guides at all-guides.com
01/03
SUBMENU
EASYCARE SETTINGS
01/07
02/07
EASYCARE\SETTINGS
easyCare tanning time
>
> 8min .. . 20min
Allows for preselecting the tanning time. The
tanning power will be adapted automatically.
Factory setting: 20 min
EASYCARE\SETTINGS
Adjust
>
> 1 .. . 7
These settings must only be made by
trained service personnel!
The default setting „1" must not be
changed.
EASYCARE\SETTINGS
Set value quicktest
>
> 150.. .300
These settings must only be made by
trained service personnel!
Factory setting: 244
EASYCARE\SETTINGS
Melanin min value
>
> 0.. .400
These settings must only be made by
trained service personnel!
Factory setting: Depending on the operator country
U t i l i s a t i o n e t M a i n t e n a n c e |
03/07
04/07
05/07
06/07
33
Optima