Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL FOR HERMÈS
● Check the safety clip is in place.
● Check the 4 clips of the hanger bar are
present and functional.
● Check the safety ring is present and properly
folded down.
● Check the axle locking pin is present
● Check the positioning stud is in the slot pro-
vided at the back of the mast support.
IDENTIFICATION LABEL
The identification label is affixed on the cross bar.
Device
name
Manufacturing
date
(year/month)
III - SPECIFICATIONS
Hermès
3.1)
Dimensions (unfolded) L x w x h
Lifting capacity
Inner distance between the legs
Turning diameter
Base height
Lifting time
Patient lift weight
Service life
Front castors
Rear castors
Structure: steel - Coating:
Electric actuator (lifting)
Electric actuator (spacing)
1,356 x 741 x 1,320 mm
250 kg
600 mm min. to 1,100 mm max.
3000 mm
114 mm
45 s (empty)
57 kg
10,000 cycles at 250 kg
dia. 100 mm without brakes
dia. 100 mm equipped with a brake
24 VDC 12,000 N
24 VDC 3,500 N
Mechanical disengagement of
the actuator rod (red ring)
Battery power supply
Built-in battery charger
Battery charge indicator
Buttons
Autonomy of the patient lift in
number of cycles (lifting/lower-
ing) with an average weight of
100 Kg, with new and charged
batteries
CE marking year
Complies with NF EN ISO 10535
standard
Serial
number
Dimensions +/- 1 cm
see photo 6 p.7
24 VDC 2.9 Ah
(included into the battery pack)
with a LED
Emergency stop and emergen-
cy lowering
40 cycles
2010
110,5 cm
74 cm
60 cm
95 cm
63 cm
176,5 cm
200,3 cm
51,4 cm
11,4 cm
EN
15
Publicité
Table des Matières
