Publicité
Les langues disponibles
Les langues disponibles
Unplug the power cord from mains socket before commencing any activities related to installation,
adjustment, repair or maintenance.
MAINTENANCE AND STORING
•
Cleaning the device after each use is recommended.
•
Do not use water or any other liquid for cleaning.
•
Do not use any cleaning agents or solvents, they may damage plastic parts.
•
Clean the tool with a dry cloth or blow with compressed air at low pressure.
•
Clean ventilation holes in the motor casing regularly to prevent device overheating.
•
In case of excessive commutator sparking, have the technical condition of carbon brushes of the motor
checked by a qualified person.
•
In case of power cord damage replace it with a cord with the same specification. Entrust the repair to a
qualified specialist or return the tool to a service point.
•
Always store the tool in a dry place, beyond reach of children.
REPLACEMENT OF CARBON BRUSHES
Immediately replace worn out (shorter than 5 mm), burnt or cracked motor carbon brushes. Always
replace both carbon brushes at a time.
Entrust replacement of carbon brushes only to a qualified person. Only original parts should be used.
All defects should be repaired by service workshop authorized by the manufacturer.
RATED PARAMETERS
Parameter
Supply voltage
Power supply frequency
Rated power
Rotational speed
Impact rate
Impact energy
Working tool shank
Maximum drilling diameter
Protection class
Weight
Year of production
NOISE AND VIBRATION DATA
Information regarding noise and vibration
The following levels of emitted noise, such as emitted acoustic pressure Lp
and measurement uncertainty K have been given in the instruction manual as defined in the EN 60745
standard.
The following vibration value (acceleration value) a
ned as defined in the EN 60745-2-6 standard.
The vibration level provided in this instruction manual have been determined according to the measure-
OPERATION AND MAINTENANCE
TECHNICAL PARAMETERS
Rotary Hammer
concrete
steel
wood
and measurement uncertainty K have been determi-
h
18
Value
230 V AC
50 Hz
800 W
0-1200 min
-1
0 - 5300 min
-1
3,2 J
SDS Plus
28 mm
13 mm
30 mm
II
3,2 kg
2021
and acoustic power level Lw
A
A
Publicité
