OmniPod DASH Guide De L'utilisateur page 46

After specifying a basal rate for the final segment, your Basal Program is complete.
Review the Basal Program
The next screen summarises the start and end times, duration and basal rate for
each segment of the Basal Program.
1. Tap CONTINUE to review your Basal
Program.
2. Check that the graph and the
individual segment values are correct.
The total daily amount of basal insulin
to be delivered by this Basal Program
is listed below the graph.
3. To change an end time or basal rate for
a segment:
a. Tap the row containing the
segment you would like to change.
b. Tap the End Time field and enter
the new end time for the segment.
c. Tap the Basal Rate field and enter
the desired basal rate.
d. Tap NEXT.
e. Then define the end time and basal
rate for any following segments, as needed.
4. To add a new segment:
a. Tap the row containing the start time of the new segment.
b. Tap the End Time field and enter the start time of the new segment as the
end time of this segment.
c. Change the basal rate, if necessary.
d. Tap NEXT.
e. Then define the end time and basal rate for any following segments, as
needed.
5. To delete a segment:
a. Note the end time of the segment you want to delete.
b. Tap the segment that precedes the segment you want to delete.
c. Tap the End Time field and enter the end time of the segment you want to
delete. This 'overwrites' the segment you want to delete.
Initial PDM setup 2
Effective Date: 18OCT2020, PCO-000235
29