Installation & Operation - Castolin MIG 170 multi Manuel D'utilisation

Keep your head out of fumes & gases produced from welding.
Use ventilation or exhaust to remove fumes & gases from breathing zone
and general area.
WARNING!
WELDING SPARKS can cause fire or explosion
Keep flammable material away from work area.
Do not weld on containers that have held combustibles
WARNING!
ARC RAYS can burn
Wear eye, ear and body protection – Make sure work area is protected by
proper shielding to avoid injury to passers by.
Installation of MMA welding
1. Turn the power source on and select MMA function through the
2. Set the welding current in relation to the electrode to be welded.
3. Connection of output cables
Two sockets are available on this welding machine. For MMA welding the
electrode holder should generally be connected to the positive socket, while
the work piece should be connected to the negative socket. However, the
polarity can be reversed and careful attention should be paid to the polarity
recommended by the electrode manufacturer.
20
6. INSTALLATION & OPERATION
MIG 170 multi