thermo mate GHAF302 Bref Instructions page 24

Burner cap
Burner crown
Thermocouple
Accessible parts may be hot when the grill is in use. Young children should
be kept away. Place the burner onto the burner base one by one and stuck,
rotate left and right to check if the burners are in place, the burner is placed
correctly when it cannot be rotated. Finally center placed the burner cap on
the burner. If you cannot light the flame even after several attempts, check if
it is in the correct position. To put the flame out, turn the knob to the symbol
"OFF".
As soon as a liquid starts boiling, turn down the flame so that it will barely
keep the liquid simmering. If the control knobs become difficult to turn, please
contact your local service center. Users could not use the cooking vessels on
the hotplate that overlap its edges. All burner caps can't be dislocated installa-
tion, otherwise it will lead to flashback on the upper aluminum seats
and cause the upper aluminum seats to melt and deform, see below figures
for correctly placing the burner caps.
1(844) 334-4203
23
support@thermomate.com
Ignition electrode
Locator pins
Thermocouple
Pin indentations
Fig.31
CAUTION
Fig.32
WARNING
Burner cap
Ignition
electrode