f.
Fixing fittings(hooks, screws) are provided to place the cooktop on
worktop, the worktop measure 0.8" to 1.9" in thickness(Fig.11).
Note: Use the hooks contained in the "installation package".
Hook position for
H=0.8" top
g. In the event, the gas cooktop is not installed on a built-in oven, a wooden
panel must be inserted for insulation. This panel must be placed at least
0.8" distance from the bottom of cooktop.
Important: When installing the gas cooktop above a built-in oven, the oven
should be placed on two wooden strips; in the case of a joining cabinet
surface, remember to leave a space of at least 1.8" x 22" at the back.
When installing on a built-in oven without forced ventilation, ensure that
there are air inlets and outlets for ventilating the interior of the cabinet
adequately.
When installing cooktop on a built-in oven without forced ventilation,
ensure that have air inlets and outlets to ventilate the interior of the cabinet
adequately.
Hook position for
H=1.6" top
Fig.11
Fig.12
Fig.14
Hook position for
H=1.9" top
Fig.13
Fig.15
1(844) 334-4203
support@thermomate.com
10