Emist EPIX360 Mode D'emploi page 5

PLASTIC PARTS CLEANING SOLVENT HAZARD
Many solvents can degrade plastic parts and cause them to fail,
which can lead to serious injury or property damage. In order to help
prevent against degradation:
FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD
Flammable fumes, such as solvent and paint fumes, in a work area can
ignite or explode. To help prevent fire, explosion and electric shock:
©2021 EMist® is a registered trademark of SanoTech 360, LLC. All rights reserved.
WARNINGS
• Use only water-based solvents to clean
equipment or parts.
WARNINGS
• Electrostatic equipment must be used only by
trained, qualified personnel who understand the
requirements of this manual.
• Stop operation immediately if static sparking
occurs or you feel a shock. Do not use equipment
until you identify and correct the problem.
• Use and clean equipment only in well ventilated
area.
• Never spray a flammable chemical
(with a flashpoint less than 60˚C).
• Do not turn lights on or off when flammable
fumes are present.
• Keep spray area free of debris, including
solvents, rags, gasoline or any flammable
chemicals.
• Keep a working fire extinguisher in the work area.
• CAUTION, TO AVOID ELECTRICAL SHOCK,
DO NOT TOUCH OR INSERT ANYTHING IN
THE NOZZLE OF THE SPRAYER
EMI-018-21 Multilingual Manuals - 040521
EN