Connecting An External Device; Connecting Using An Analog Audio (Aux) Cable - Samsung MX-ST50B Manuel

04 CONNECTING AN EXTERNAL DEVICE

Connect to an external device via a wired or wireless network to play the external device's sound
through the Sound Tower.

Connecting using an Analog Audio (AUX) Cable

stereo cable (not supplied)

- AUDIO -
R
 0.14 inches (3.5 mm) stereo Cable (AUX1)
1. Connect AUX1 jack on the main unit to the AUDIO OUT jack of the Source Device using an
0.14 inches (3.5 mm) stereo cable.
2. Select "AUX1" mode by pressing the
• You can also select a source using AUX button on the remote control.
Audio Cable (AUX2)

1. Connect AUX2 (IN) terminals on the main unit to the AUDIO OUT terminals of the Source Device
using an audio cable.
2. Select "AUX2" mode by pressing the
control.
• You can also select a source using AUX button on the remote control.
0.14 inches (3.5 mm)
Rear of the Sound Tower
AUX 1

Audio (AUX) Cable (not supplied)
L
BD / DVD player / Set-top box / Game console
Mobile device / MP3 / PMP
(Source) button on the top panel or on the remote control.
(Source) button on the top panel or on the remote
ENG - 12