Transmitter Handling; Throttle Trigger; Steering Wheel; Low Battery Alarm - Carson REFLEX WHEEL PRO Mode D'emploi

Transmitter Handling

A. Throttle trigger
GB
Forward/
Neutral
Speed up
Steering trim
(ST)
Throttle
trim (TH)
Throttle Trim:
Trim the throttle servo slightly when the trigger is at
the neutral position.
Steering Trim:
If the front wheels do not align straight, use the
steering trim to adjust.

Fail Safe Function Setting

1. Set the throttle and the steering wheel to the
normal position.
2. Turn on the transmitter and receiver.
3. Press the F/S SET button, the LED on the receiver
should start flashing.
22 CARSON Reflex Wheel Pro 2,4 GHz 50 050 0032
1. Push the trigger forward to
slow down or brake.
2. Pull the trigger backward to
Brake/
accelerate.
Speed down
B. Steering wheel
Left
ATTENTION
Keep the transmitter and receiver not over
40 cm apart when setting and binding.
Use the REV switches to reverse the steering or
throttle operating direction.

Low battery alarm

When the battery power is too low,
promptly stop the action.
4. Put the throttle trigger at the brake position,
press the "F/S SET" button, the LED should
become solid.
5. For electric models, put the throttle trigger at the
stop position when you are making the failsafe
setting.
Neutral
Right