Honeywell ULTRASONIC COOL MIST HUL585 Serie Manuel Du Propriétaire page 5

FILLING / REFILLING
NOTE: You have two options for filling your humidifier's Water Tank: under the faucet at the sink, or with
a pitcher of water at the humidifier.
Manufacturer and Distributor will not accept responsibility for property damage caused by water spillage.
HUL585/HUL588 holds 1.25 gallons (4.7L) of water (tank and reservoir combined).
Filling
1. If filling at the sink, remove Tank using handle inside tank, carry to sink and fill with cool water.
OR
2. If filling at the humidifier, ensure Tank is securely seated on Base. Open Tank lid and fill with cool
water using a water pitcher.
NOTE: Fill Tank with cool water. DO NOT fill with warm or hot water. DO NOT ADD ESSENTIAL OILS,
MEDICATIONS, OR INHALANT LIQUIDS, such as Vicks VapoSteam, to the Tank. Doing so could cause
damage to the humidifier and void the warranty.
3. If filled at the sink, carry the full Tank back and place back on Base.
4. Close the Tank lid.
1
.
USING YOUR HUMIDIFIER (HUL585 ONLY)
1A. Power: Plug Adapter Cord into the port on the back of the unit.
1B. With the Power Knob in the off position, plug humidifier into a 120V outlet.
CAUTION: TO AVOID ELECTRIC SHOCK, DO NOT PLUG HUMIDIFIER INTO AN OUTLET WITH WET HANDS.
2. Output: Turn the Power Knob clockwise to highest setting. It is recommended you set the output to high until
you reach a comfortable humidity level.
3. Position humidifier to direct mist output away from walls, furniture and bedding.
4. Humidity Level: When a comfortable humidity level is reached, turn Power Knob to a lower setting. A
comfortable humidity level is between 40-60%. To monitor your humidity level, use a humidity monitor such
as the Honeywell HHM10 model, or H10CV1 in Canada (Not included).
1A
2
Or
1B
3
2 3
5
4
4