Installing The Escutcheon - Kenwood DDX6029 Manuel D'installation

Installing the Escutcheon

■ For General Motors
1. Refer to the section <Removing the Hard
Rubber Frame> and then remove the hard
rubber frame.
2. Cut out accessory 5 to meet the shape of
the opening of the center console.
3. Attach accessory 5 to the unit.
■ For Toyota/Scion
1. Refer to the section <Removing the
Hard Rubber Frame> and then remove
the hard rubber frame.
2. Cut out accessory 5 as illustrated.
When cutting out accessory 5, make
sure it fits the opening in the center
console.
3. Fold double-sided adhesive (accessory
6) along the slit and attach it to
accessory 5 cut-out against the
center rib as illustrated. Use 2 pieces
of accessory 6 for 1 accessory 5 cut-
out.
4. Attach accessory 5 cut-out to the
unit.
8
|
English
Cutting line
Accessory 6
Cut out to meet the shape of the
opening in the vehicle.
Accessory 5
Accessory 5