Safety Instructions - fun pro THREE Mode D'emploi

EN
12

SAFETY INSTRUCTIONS

• The assembly of the scooter must be done by an adult.
• Ensure the steering system is correctly adjusted and that all connect
components are firmly secured and not broken.
• The scooter may only be used by one person at a time.
• Observe the limitations of use according to applicable road traffic
regulations.
• To ensure a long product life, avoid exposing the scooter to moisture, high
temperatures and direct sunlight
• Screws and other moving parts should be checked regularly for fit and
function. Regularly check that all self-locking nuts and self-locking fixings
are properly seated. Stunt scooters are impacted by a lot of shocks
and vibrations which can lead to loosening of parts. Regular checks are
necessary.
• Always wear suitable shoes when riding the scooter.
• It is advisable to wear safety equipment such as helmets and protectors
Wear safety equipment including a suitable helmet and hand/wrist,
elbow, and knee protection - especially at the beginning, if the driving
characteristics are not yet so well known.
• Activate the brake by slowly stepping on it with your rear foot. Practise
braking at slow speeds in safe environments.
CAUTION! The brakes can become very hot during use! Allow the brake
•
to cool down before touching it.
• Lead your child at the beginning and let him or her ride alone only when
you are sure that he or she has sufficient knowledge of the scooter.
• A fun pro scooter can be fast - but the speed also increases the risk of
falling. We therefore recommend that you only drive so fast that you can
always safely dismount. Explain to your child that speed also involves risks.
Never assume you can travel at speed or perform tricks without practice
or without risk of injury.
• The scooter should be ridden on flat, clean and dry surfaces and where
possible away from other users. Do not ride in the dark or in conditions
with poor visibility.
• Contact with sharp bumps, rocks/sticks, sudden surface changes or drains
may cause a pitching motion/wheel entrapment or the scooter to suddenly
stop. Avoid surfaces where there is water, sand, gravel, dirt, leaves or other
debris.