Dr.Junghans Rollator Premium Manuel D'utilisation page 16

Depress the snap button on
the handle tube and slide the
handle tube up and down to
the desired height.
2． Installation and adjustment of the brake cable
Note: DO NOT remove the brake cable out of the handle tube in case of brake system
down and accident.
1)． Position of brake cable
Note: For the brakes to function properly, the brake cable should be flush along side brace
and correctly hide in the tube.
2)． Clockwise rotate the nut of the brake adjustment to release the brake system.
(FIGURE 9）
The direction to release the nut of brake
3). Loosen the brake: counterclockwise rotate the nut of the brake adjustment.
Figure 8
Nut of the brake adjustment
Figure 9
6