Dr.Junghans Rollator Premium Manuel D'utilisation page 13

2. Lay down the rollator, with the handle tubes standing up and the oval plastic fully
assembled with the leg tube as shown in figure 2
Handle tube component
3. Contrarotate the lever by 90 degree by pressing against the washer and then lock the
lever to the slot.
The lever press against the washer
Figure 3 lock the lever to the slot
4. Open the rollator, open the seat and press the seat tube until fully assembled in to the
plastic slot. The rollator will remain OPEN. Figure 4.
Open the rollator
Oval plastic fully assembled with the leg
tube
Figure 2
lock the lever to the slot
3