Sauder Summit Station Serie Instructions De Montage page 18

Step 13
First, fi ll the holes in the BRACE (N) 1/4 to 1/2 full with
å
GLUE (177M). Then, insert the WOOD DOWELS (15F)
into the holes. Wipe away the excess GLUE.
Now, fi ll the hole in the UPRIGHT (D) 1/4 to 1/2 full
å
with GLUE.
Fasten the BRACE (N) to the UPRIGHT (D). Tighten
å
one HIDDEN CAM.
NOTE: Be sure the WOOD DOWEL in the BRACE
å
inserts into the UPRIGHT. Wipe away the excess GLUE.
Insert the CAM DOWELS in the edge of the BACK (M)
å
into the UPRIGHT (D) but do not tighten them.
NOTE: Do not
tighten in this step.
Finished
edge
e
f a c
M
S u r
w i t h
D E N
H I D
M S
C A
15F
Page 18
15F
N
D
Finished edge
425015
Maximum
Arrow
210 degrees
Minimum
190 degrees
177M
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
www.sauder.com/service