Certificate Of Compliance - Temposonics E Serie Manuel D'utilisation

Issued to
Address
Project Number
Product
Model Number
Ratings/Markings
Applicable Standards
Factory/Manufacturing Location
Statement of Compliance: The product(s) identified in this Certificate and described in the Report covered
under the above referenced project number have been investigated and found to be in compliance with the
relevant requirements of the above referenced standard(s). As such, they are eligible to bear the QPS
Certification Mark shown below, in accordance with the provisions of QPS's Service Agreement.
Issued By: Dave Adams P.Eng.
Signature:
81 Kelfield St., Units 7-9, Toronto, ON M9W 5A3 Tel: 416-241-8857; Fax: 416-241-0682
QSD 34
QPS Evaluation Services Inc
Testing, Certification and Field Evaluation Body
Accredited in Canada, the USA, and Internationally

CERTIFICATE OF COMPLIANCE

(ISO TYPE 3 CERTIFICATION SYSTEM)
Temposonics GmbH & Co KG
Auf Dem Schüffel 9, Lüdenscheid,
Germany, D-58513
LR1346-3
Linear Position Sensors
Tempsonics ® E-Series ET (see annex below for full model information)
see annex below for full marking information
CSA C22.2 No. 60079-0:2015, CSA C22.2 No. 60079-15:2016, CSA
C22.2 No 60079-31:2015, CSA C22.2 No 61010-1:2012, CSA C22.2
94.2:2015
ANSI/ISA 12.12.01 (2015), ANSI/UL 61010-1 (2012), ANSI/UL 50E 2nd
Edition, ANSI/UL 60079-0 (2013), ANSI/UL 60079-31 (2015), ANSI/UL
2225 (2013)
Same as above
www.qps.ca
File
LR1346
Date: March 28, 2017
Rev 04