Télécharger Imprimer la page

SCANGRIP EX PROOF EX-VIEW 03.5606 Mode D'emploi page 2

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
UK
EX-VIEW
Rechargeable EX PROOF headlamp with sensor function
Important Reminders
• Please read this instruction before any use, maintenance and service of explosion-proof lights.
• The explosion-proof light must be used by a certain professional training person.
• Must use the replacement parts which produced or appointed by the manufacturer for
maintenance. Make sure the maintenance and service are not in a dangerous place and fulfilled by professional
trained person. Using the parts which not manufactured by Scangrip A/S will destroy the explosion-proof
performance of the explosion-proof lights.
• The explosion-proof lights should comply with the relevant laws and regulations.
WARNING!
• Do not open when an explosive atmosphere is present!
• Do not charge the battery in hazardous location!
• Do not replace battery when an explosive atmosphere is present!
WARNING!
Battery Pack:
• Only use the battery pack from Scangrip A/S. Part No.10701520A.
Battery No.: 3.8V 1600mAh 6.08Wh
• Only use the adaptor from Scangrip A/S. Part No.10905322.
Model No.: SA57-050100V-002 Input Voltage:AC100~240V/50-60Hz,
Output Current: DC1A Output Voltage: DC5V
• Using other sources parts may lower the intrinsic safety level of the explosion-proof lights. Make sure
charging in non-dangerous environment.
1. STANDARD
IEC 60079-0:2011 Explosive atmospheres 一 Par0:Equipment 一 General requirements
IEC 60079-11:2011 Explosive atmospheres 一 Par11:Equipment protection by intrinsic safety "i"
IEC 60529:2001 Degrees of protection provided by enclosure (IP code)
2. Product Model Definition and Basic Parameters
Product Model Definition
Rechargeable EX PROOF headlamp with sensor function EX-VIEW 03.5606
Basic Parameters: Table 1.
Table 1: Light Design Parameters
Product Description:
Product Model NO./ Item NO:
Dangerous Zone:
Adaptor:
Battery Type and Capacity:
Power Rating:
Explosion-proof Symbol:
Luminous Flux:
Working Time:
CRI (Ra):
CCT:
IPXX:
Operation Temperature(°C):
Storage Temperature(°C):
Product Dimension:
Product Weight:
Rechargeable EX PROOF headlamp with sensor function
EX-VIEW 03.5606
Zone 2/ Zone 22
DC5V/1A
3.8V/ 1600mAh
1.6W
II 3G Ex ic IIC T5 Gc / II 3D Ex ic IIIC T100°C Dc
High 200lm
High 2.5h
>80
5500K~6500K
IP65
-20°C~+45°C
-5°C~+35°C
L90.3*W40*H52 mm
130g
Product Model NO.
Product Description

Publicité

loading

Ce manuel est également adapté pour:

Ex proof ex-view 03.5606auEx proof ex-view 03.5606uk