Appendix; Connecting The On Command Box - JVC AV-27GFH Manuel D'instructions

Connecting the On Command Box

When you use this television with the hotel system of On Command Corporation, you connect it
via the On Command Box.
When it is connected to the On Command box and transferred to the server, hotel mode is turned
on automatically and you can use the On Command Corporation remote control to operate the
TV. You can no longer use the JVC remote control (RM-C205).
Note: When an On Command Box is connected to the TV, be sure to turn the power to both the
On Command Box and television on or off simultaneously. Please do not turn the power on or off
to one device only.
Choose VIDEO INPUT when Hotel Mode is On
Press "0" and "1" on the On Command remote control to switch to a signal source connected to
the Front Input jacks.
AUDIO
R L MONO
DIGITAL
INTERFACE
AUDIO VIDEO S-VIDEO
R L MONO
REAR
IN
OVER
DIGITAL
INTERFACE
Other Rooms
Server
VIDEO
S-VIDEO
REAR
IN
OVER
OCC Box
(On Command Corporation)
VCRs or DVD

Appendix

Hotel's Office
35