Dorel Asia Baby Relax DA7608-1 Manuel D'instructions page 23

Furniture Wall Safety Strap
A
MOUNTING BRACKET
4 PCS
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
ATTACH A MOUNTING BRACKET (A) SECURELY TO THE BACK EDGE OF THE FURNITURE USING THE
Step 1:
SHORT SCREW (D), THROUGH THE SMALLER HOLE.
LOCATE THE OTHER MOUNTING BRACKET (A) ON THE WALL OVER A WALL STUD AND 2 INCHES
Step 2:
BELOW THE MOUNTING BRACKET SECURED TO THE BACK OF YOUR UNIT. ATTACH TO THE WALL
STUD USING THE LONG SCREW (C) PROVIDED, THROUGH THE SMALLER HOLE.
PLACE THE FURNITURE INTO POSITION SO BOTH MOUNTING BRACKETS ARE VERTICALLY IN LINE.
Step 3:
LACE THE END OF THE SAFETY WALL STRAP (B) THROUGH THE LARGER HOLE IN EACH MOUNTING
BRACKET (A). BRING BOTH ENDS TOGETHER AND SLIDE THE FLAT END THROUGH THE LOCKING
END AND DRAW IT THROUGH UNTIL ALL SLACK IS REMOVED.
CONFIRM THAT THE STRAP IS SECURELY LACED AND LOCKED.
Step 4:
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY
REMOVE THE SCREW FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
B
SAFETY WALL STRAP
2 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE
MAY TIP OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHIND
THE FURNITURE TO ENSURE SAFETY.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.
C
LONG SCREW
2 PCS
B B A A
D
SHORT SCREW
2 PCS
B