Kalorik PPG 43639 Mode D'emploi page 6

Moulins a sel et a poivre automatiques
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USE
Before seasoning your meals, you can adjust the fineness of the
ground salt and pepper by turning the adjustment wheel on the
underside of the mill.
To do so, turn the wheel clockwise for a finer grind and
counterclockwise for a coarser grind.
Turn the On / Off switch to the "On" position to power on the unit.
Note: The On/Off switch doesn't need to be turned back to the "Off"
position after each use. Leave the switch on the "On" position for a
convenient and easy use of the pepper and salt mills. Turn the switch to
the "Off" position before replacing batteries or if left unused for a long
period of time.
Hold the appliance above the meal to season. There is no button to
push, grinding will start automatically when the grinder is put upside
down (gravity-activated and automatic function).
MAINTENANCE
Clean the housing and grinding head with a damp cloth and dry with a
paper towel. Do not immerse the mill in liquid or put it in a dishwasher.
Do not use with wet hands. Do not use cleaning products or
detergents.
BATTERIES
If your appliance does not work properly, it is probably because the
batteries are discharged. In that case, replace them with new ones of
the same type (see "Before use").
Please eliminate the old batteries in an environmentally friendly way.
www.KALORIK.com
6
PPG 43639 - 170120

Publicité

Table des Matières
loading

Table des Matières