Press Nuts; Upright Bikes; Use At Rear Of Wheel Tray With Bolt; Ridged Baseplate - Yakima MightyMount 28H Instructions De Montage

MightyMount 18H
MightyMounts replace SnapArounds for
factory installed racks. Follow accessory
instructions and use this reference sheet
to attach your accessory.
PRESS the nuts
firmly into each of
the MightyMounts.
Bikes: Do not press
nuts into the MightyMount at rear of wheel tray.

Ridged Baseplate

UPRIGHT
BIKES
—
Which
baseplate
do you
have?
BASKETCASE
DO NOT EXCEED THE FACTORY
WEIGHT LIMIT OF YOUR
VEHICLE'S RACKS.
See your Yakima Accessory instructions for the Yakima Limited Warranty.
MAKO
SADDLES
LANDSHARK
HULLY ROLLERS

UPRIGHT BIKES:

BLACK caps must go on
FRONT bars.
DO NOT press nuts into
MightyMount at rear of wheel tray.
Secure front and rear of long
loads to ends of vehicle for safe
transport. Failure to do so can
result in property damage,
personal injury, or death.
UPRIGHT BIKES:
Bolt for wheel tray.
Use at rear of wheel
tray with bolt.
KAYAKS & BASKET CASES:
ALTERNATE the grey
and black caps.
Angled Baseplate
If you have this baseplate call us
for the MightyMount Spacer Kit
Part #8820062
888-925-4621
KAYAK STACKERS
If you have this accessory call us
for the Bolt Upgrade Kit
Part #8860007
888-925-4621
1030927 RevD