Yakima MightyMount 28H Instructions De Montage page 20

MightyMount 27H
MightyMounts replace
SnapArounds for factory
installed racks. Follow
accessory instructions and
use this reference sheet to
attach your accessory.
PRESS the nuts
firmly into each of
the MightyMounts.
Bikes: Do not press nuts into the
MightyMount at rear of wheel tray.
Ridged Baseplate
UPRIGHT
BIKES
—
Which
baseplate
do you
have?
BASKETCASE
DO NOT EXCEED THE FACTORY
WEIGHT LIMIT OF YOUR
VEHICLE'S RACKS.
See your Yakima Accessory instructions for the Yakima Limited Warranty.
MightyMount at rear of wheel tray.
MAKO
SADDLES
LANDSHARK
HULLY ROLLERS
DO NOT press nuts into
Secure front and rear of long
loads to ends of vehicle for safe
transport. Failure to do so can
result in property damage,
personal injury, or death.
Use at rear of wheel
UPRIGHT BIKES:
tray with bolt.
Bolt for wheel tray.
Angled Baseplate
If you have this baseplate call us
for the MightyMount Spacer Kit
Part #8820062
888-925-4621
KAYAK STACKERS
If you have this accessory call us
for the Bolt Upgrade Kit
Part #8860007
888-925-4621
#1031345 RevC