Sony CMT-DX400 Mode D'emploi page 19

Masquer les pouces Voir aussi pour CMT-DX400:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

General Setup Page
x TV Display
Select the aspect ratio of the connected TV.
16:9
Select this when you connect a wide-
screen TV or a TV with a wide mode
function.
4:3 Letter
Select this when you connect a 4:3
screen TV. Displays a wide picture
Box
with bands on the upper and lower
portions of the TV screen.
4:3 Pan
.Select this when you connect a 4:3
screen TV. The system automatically
Scan
displays the wide picture on the entire
screen and cuts off the portions that do
.
not fit
x OSD Lang (On-Screen Display)
You can switch the display language on the TV
screen.
x Screen Saver
The screen saver prevents damage to the TV
screen by avoiding exposure to a static image for
too long.
[On]: Switch to TV screen saver mode when
playback has been stopped or paused for more
than 15 minutes.
[Off]: Screen Saver is canceled.
x Last Memory
[On]: Resume playback last disc if stop playing
by [/1.
[Off]: Disable resume playback.
When the resume playback memory is full, the
resume playback point for the earliest disc is
deleted.
x Auto Standby
You can set the standby mode.
[On]: Standby automatically when stop, pause,
no disc or eject mode for more than 30 minutes.
[Off]: Don't standby automatically.
Video Setup Page
x Progressive
You can set the progressive signal that is output
from the VIDEO OUT.
[On]: Turn on progressive scan mode.
Read the instructions on the TV and confirm
your action by pressing
[Off]: Turn off the progressive scan mode.
x DivX VOD
[
]: Display the DivX registration code.
,
Preference Page
x TV Type
Select the color system when you play a disc.
The default setting is "PAL" for European
model and "NTSC" for other models.
PAL
Changes the video signal of an
NTSC disc and outputs it in the
PAL system.
Multi
Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a dual
system, select "Multi."
NTSC
Changes the video signal of a PAL
disc and outputs it in the NTSC
system.
x Audio
Select the preferred audio language for DVDs
with multiple sound tracks.
x Subtitle
You can switch the language of the subtitle
recorded on the DVD VIDEO.
x Disc Menu
You can switch the language for the disc's
menu.
Note
• If the selected audio/subtitle/disc menu language is
not available on the DVD, the disc's default language
will be used instead.
.
continued
GB
19

Publicité

Chapitres

Table des Matières
loading

Table des Matières