Getting Started - AIPTEK PocketCinema V60 Guide De L'utilisateur

User's Manual

Getting Started

Charging the product
The projector is builted in a 3000 mAh
Li-Polymer battery for mobile use. Please
charge the projector for 8 hours prior to its
first use. Connect one end of the supplied AC
adapter to DC IN jack and the other end to a
power outlet to start charging. Exchange the
plug (EU, US and etc.) of AC adapter that
accommodates the type of power outlet in
your country if it's different.
Charging Status
Power Off, charging by AC power adapter
Power Off, charging by USB connection
Power On and connect AC power adapter
Power On and connected with USB cable
Charging LED Indicator
During charging, the LED on Power Button turns Orange. It turns to Green when the
battery is fully charged.
Turn On / Off the Projector
Push the Power Switch downward for 1 second to turn ON the projector.
To turn off the projector, push the Power Switch downward for 2 seconds.
Adjusting the Focus
Adjust the focus by turning the Focus Wheel
upward or downward to get a sharp and clear
picture.
Select the Language
Use the navigation keys
submenu. Select 'Language' and press
preferred language and confirm with
to select 'Setting' and press
(OK) to enter the language list. Select your
(OK). Press
Page 6
Charging Time
around 5 hours
around 8 hours
no charging
no charging
(OK) to enter the
(Exist) to return to Main Menu.