Lighting Instructions - Napoleon PT600RB-INFRARED Mode D'emploi

LIGHTING INSTRUCTIONS

Open lid.
Ensuring burner controls are in
the off position, turn on the gas
supply valve.
Main Tube
Burner Lighting
Turn left burner
control to high
position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
With left burner
operating on high,
turn the centre,
and/or right burner
to high.
The propane cylinder is equipped with an excess flow device. Unless all burners are turned
off prior to turning the cylinder on, only small flames and low heat will be achievable.
Do not use back burner while operating main burner.
6
IGNITER
LEFT
TUBE
BURNER
Main Infrared
Burner Lighting
Turn infrared
burner control to
high position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
CENTER
RIGHT
REAR
TUBE
TUBE
BURNER
BURNER
BURNER
Back Burner
Lighting
Remove warming
rack.
Turn back burner
control to high
position.
Press and hold
igniter button until
lit, or light by
match.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
LIGHTING PORT
HOLE
(BOTH SIDES)
MAIN
INFRARED
BURNER
Side Burner
Lighting
(optional)
Open burner
cover.
Turn side burner
control to high
position.
Turn igniter knob
clockwise
several times, or
light by match.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.