Important; Caractéristiques - Genie PS 120 Mode D'emploi

INTRODUCTION
Congratulations on your purchase of the GENIE battery operated pencil sharpener. This is a
precision instrument designed specifically to provide reliability, durability, and outstanding
performance.
In order to ensure the scale continues to deliver peak performance, please read these operation
instructions carefully and thoroughly prior to initial usage.

IMPORTANT

1.
Place the pencil sharpener on an even surface for a secure stand.
2.
The manufacturer does not warrant this unit to be waterproof. Do not expose this product to
rain or moisture.
3.
Avoid contact with too much dirt and dust as well as impacts.
4.
Do not use the sharpener under sun or keep it away from heating appliances such as oven,
stove, etc.
5.
If any damage occurs to the sharpener or it may not work properly, contact our service
department. Please see our warranty and service information at the end of this manual
CARACTÉRISTIQUES
Size: approx 75 x 74 x 77 mm
Weight: 140g
HOW TO USE
1 Insert the battery
Open the battery cover and insert the batteries and close the cover. Pay attention, to the
right polarity.
2. Cutting mode small hole
Insert the pencil (6-8mm diameters) in the small hole and press down. The sharpener
catches in to work. If the pencil is sharpened pull it out of the hole
3. Cutting mode big hole
Push back the security flap, the big hole is released and the pencil (9-12mm diameters) can
be sharpened as described.
4. Container cleaning
Push in the transparent container on both sides firmly and pull it backwards. After cleaning
insert the waste box back in place.
5. To the change of the blades push the blade holder upwards and take it out. Now the blades
can be changed by a screwdriver.
GB OPERATING MANUAL
5