Installing Cup Holder (When Applicable); Aircraft Installation; Instruction Manual Storage; Removing/Installing Fabric Seat Cover - Harmony DREAMTIME ELITE Manuel D'instructions

! ALWAYS be aware of what your children are doing in
the back seat.

INSTALLING CUP HOLDER (WHEN APPLICABLE)

The cup holder is stored in the cavity on
the underside of the booster seat base.
• To remove from storage, twist cup
holder while pulling to release.
TO INSTALL:
1. Slide cup holder into place over cup
holder clip ❶❷ on either side until
locked in place.
TO REMOVE:
1. Pull cup holder up and outward.
This booster seat is NOT CERTIFIED for aircraft use. Aircraft
seats are not equipped with 3-point lap-and-shoulder
belts which are required for use with this booster seat.

INSTRUCTION MANUAL STORAGE

We recommend that you store your
instruction manual in the pocket provided
on the side of the booster seat.

REMOVING/INSTALLING FABRIC SEAT COVER

Headrest: Unhook the left and right ELASTIC loops from
each shoulder belt guide ❶.
Backrest:
• Unfasten hook-and-loop tab on top of backrest ❷.
• Unhook left and right ELASTIC loops from each
of the U-shaped extensions at the base of the
backrest ❸.
25

AIRCRAFT INSTALLATION

❶
❷