Attaching The Grille Frame - Sony HT-NT5 Manuel D'instructions

3
Fasten the screws in the wall.
The screw should protrude as
illustration.
8 mm to
9 mm
(approx.
11/32 in)
4
Hang the holes of the mounting
bracket on the screws.
Align the holes at of the mounting
bracket with the screws, then hang
the unit on the two screws.
Attaching the Grille
Frame
920 mm
(36 11/50 in)
You can protect the speakers by
attaching the supplied grille frame.
We recommend that you use the unit
without attaching the grille frame if you
will be listening to High-Resolution
Audio.
Attach the grille frame parallel to
the front panel.
Attach the grille frame right-side up.
Tips
• The grille frame is fixed and its position is
determined by a magnet.
• Attach the grille frame leaving a space
from the end of the Bar Speaker.
Approx. 4 mm
(3/16 in)
Approx.
2 mm
(3/32 in)
19
US