Herth+Buss AirGuard Notice D'emploi page 78

Operating Instruction
ID format:
UsetheenterkeytoswitchtheIDformatbe-
EN
tween decimal and hexadecimal value.
Please note:
The default setting is "AUTO".
This means the device differentiates
automatically.
TIP
We recommend leaving this
setting on AUTO.
Automatic power-off:
The user can adjust how soon the AirGuard
switches itself off after it has not been used
for a certain period of time. This function
canalsobedeactivated.Presstheenterkey
to select the desired time for the automatic
power-off.
www.herthundbuss.com
All manuals and user guides at all-guides.com
TIP
We recommend activating automatic
power-offtolengthenthebatterylife
andallowyoutoworkwiththedevice
for longer.
Display contrast:
It is possible to adjust the contrast of the dis-
play.Presstheenterkeyandthenusethear-
row buttons to adjust up and down between
01 and 30.
Buzzer:
You can set a beep for the device that sounds
after a sensor has been successfully read
outandprogrammed.Presstheenterkeyto
switch to the buzzer and use the arrow but-
tons to select the ON and OFF settings.
Press ESC again to return to the manufac-
turer selection.
95990001
78