Herth+Buss AirGuard Notice D'emploi page 70

Operating Instruction
5.4 Manually modifying left/right (L/R)
EN
Thisfunctionwasdevelopedtoallowyouto
wirelessly modify the position for the left/
right wheel on the target sensor.
If you adjust the sensor accordingly,
change the tyre position on a
vehicle that differentiates between
left/right (L/R).
TIP
If a vehicle differentiates between left/
right (L/R), it is important to bear this
in mind when programming the
sensor and when mounting the wheel.
Function selection:
Use the arrow buttons to select MANUAL R/L
MODIFYandpresstheenterkeytoselect.
Checking the original ID:
Position the target sensor in parallel with the
AirGuardandpresstheEnterkeytoscanthe
originalIDnumbertoensurethatthisreally
isthetargetsensoryouwishtomodify.
www.herthundbuss.com
All manuals and user guides at all-guides.com
Scan complete:
The AirGuard will now show the target sen-
sor ID. You will hear two short beeps after the
sensor has been scanned. Press the enter
keytosetL/R.
Selecting the L/R wheel:
Use the arrow buttons to select the L/R wheel
andpresstheenterkeytomodify.
Modification complete:
The AirGuard will now modify the target
sensorforyou. Y ouwillheartwoshortbeeps
afterthesensorhasbeensuccessfullymodi-
fied.
95990001
70