Herth+Buss AirGuard Notice D'emploi page 57

All manuals and user guides at all-guides.com
Operating Instruction
Duplicating the sensor:
The AirGuard will show the ID of the OE
sensor. Then select WIRE PROGRAM, place
a Herth+Buss wheel sensor in the sensor
compartment and lock it in position or select
WIRELESS PROGRAM and hold the sensor in
parallel with the device. Place a Herth+Buss
wheel sensor in the sensor compartment
and lock into place. Press the enter key to
program the Herth+Buss wheel sensor.
Please note:
As soon as you have called up the
sensor ID, press the enter button to
program the new sensor directly. Pres-
sing the BACK button deletes the sensor
ID and the diagnosis must be repeated.
57
Duplication complete:
The AirGuard will now duplicate the sensor
for you by deleting the flash memory, pro-
gramming the sensor and checking. You will
hear two short beeps after the sensor has
beensuccessfullyduplicated.
TIP
You can overwrite the Herth+Buss
wheel sensor several times.
95990001
EN