EDM Product 08767 Manuel D'instructions page 53

(fig. 2)
Assembly Blowing (fig. 3)
For dust blowing, attach nozzle to blower outlet, turning clockwise
to lock it in place.
Dust suction (fig. 4)
• For dust suction, fit nozzle onto suction inlet and dust bag onto
blower outlet.
• After the bag fills with dust, empty the contents of the dust bag
into a dust bin by releasing the fastener.
CAUTION: Empty the dust bag before it becomes too full, or the
suction force weakens.
MAINTENANCE
CAUTION!
Always disconnect the device before performing any adjustment or
maintenance operation. If the supply cord is damaged, it must be
replaced by the manufacturer or its service agent in order to avoid a
hazard.
Disconnect from the power supply immediately if the supply cord is
damaged.
Take care not to expose this tool to the rain.
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastic parts
are susceptible to
damage from various types of commercial solvents and may be
damaged by their use.
Use clean cloths to remove dirt, carbon dust, etc.
Instruction manual
(fig. 3)
Ref. 08767
Dust bag
(fig. 4)
Nozzle
ES
PT
EN
FR