EDM Product 08767 Manuel D'instructions page 42

· Prevent unintentional starting. Ensure the switch is in the off posi-
ES
tion before connecting to power source and /or battery pack,
picking up or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that have the switch
on invites accidents.
PT
· Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
EN
· Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situa-
tions.
· Dress properly. Do not wear loose clothing or jewellery. Keep your
FR
hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving parts.
· If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust related hazards.
Power tool use and care
· Do not force the power tool. Use the correct power for your applica-
tion. The correct power tool will do the job better and safer at the
rate for which it was designed.
· Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dange-
rous and must be repaired.
· Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments, chan-
ging accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
· Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to ope-
rate the power tool. Power tools are dangerous in the hands of
untrained users.
· Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may
affect the power tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintai-
ned power tools.
· Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
· Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
Instruction manual Ref. 08767