Specifications; Installation Requirements - Wolf E Serie Mode D'emploi

Specifications

Installation Requirements

The oven can be installed in a standard or flush inset appli-
cation. If a cooktop is installed above the oven, a minimum
of 1/4" is required between the units.
(6)
Finish the edges of the opening. They may be visible when
the door is open.
For standard installations, the face trim overlaps stiles and
rails. Refer to the chart.
For flush inset installations, a minimum 1/8"
required on all sides. To ensure consistent reveals, each
corner of the opening must be exactly 90°.
4 | Wolf Customer Care 800.222.7820
INSTALLATION REQUIREMENTS
BASE SUPPORT
24" E Series Oven
TRIM OVERLAP
Top
Bottom
Sides
reveal is
(3)
MIN
150 lb
(68 kg)
1/4"
(6)
0"
(0)
11/16"
(17)