Elica SNAP Mode D'emploi page 23

10.
POSITION THE FRAME AND THE REAR BODY, AND FIX TO THE WALL WITH THE SCREWS
10a.
EN
11.
INSERT THE SUPPLIED CABLE CLAMP
11a.
block the cable
12
10b. fix to the wall with screws
screws (x4)
12.
REFIT THE AESTHETIC COVER AND
ELECTRONICS OF SNAP
11b.
direct
the cable
towards
the top
13.
HOOK THE AESTHETIC COVER TO THE FRAME. GENTLY PRESS ON THE ENTIRE PERIMETER
CONNECT THE
14.
REFIT THE GLASS ON THE AESTHETIC COVER
Warning!
arrange
the electronic
wires in such
a way that they
do not get stuck
during closing
15. SNAP IS NOW READY TO BE CONFIGURED
CONNECT THE CABLE TO THE SOCKET
EN
13