Camera Brightness Adjustment; Camera Activation - SCS DWS Manuel D'installation Et D'utilisation

The System will confirm pairing process to be successful with "PAIRED"
displaying on screen, and indicate pairing process failed with "PAIRING FAIL."
Repeat the camera pairing process if you want to add more cameras to the receiver.
3. Press ESC to return to MAIN MENU or press ▼▲ to select another camera to
continue the camera pairing process.

Camera Brightness Adjustment

With IMAGE RIGHTNESS option highlighted, use ▼▲ to adjust camera brightness
1.
from OFF, LOW, MEDIUM to HIGH. Press the MENU button once to confirm.
Press ESC to return to MAIN MENU or press ▼▲ to select another camera.
2.

Camera Activation

With ACTIVATION option highlighted, use ▼▲ to enable or disable the camera(s).
1.
Press the MENU button once to confirm.
Press ESC to return to MAIN MENU or press ▼▲ to select another camera.
2.
NOTE: Make sure camera(s) paired is enabled for SCAN or QUAD to function properly
(camera "ON" can only be selected when camera has been paired to system.).
25