Configuring Your Video Receiver; Camera Pairing - SCS DWS Manuel D'installation Et D'utilisation

CONFIGURING YOUR VIDEO RECEIVER

CAMERA SETUP
1. Select CAMERA SETUP, press the MENU button to enter sub-menu.
2. Use ▼▲ to select the camera to set up (camera 1-4).
3. Use ◄► to select the sub-menu [CAMERA PAIRING] [BRIGHTNESS] [CAMERA
ON/OFF]

Camera Pairing

1.
With the PAIRING option highlighted, press the MENU button once to begin
camera pairing.
2.
The pair LED on camera will blink once and following with LED blinking
continuously to indicate data transmission in progress. Press and release the pairing
button on the camera once quickly.
Your camera is paired to the monitor at
the factory to channel 1.
To add new camera(s) to your system,
you have to pair it to the different
channel(s).
24