Before Each Use - Pro-Point 8968299 Mode D'emploi

V1.0
•
Sponge
• USB charging cable and stand base
IDENTIFICATION KEY
A Micro USB charging port
B Status LED
C Power button
D Soldering tip
E Soldering iron stand
F Sponge
G (2) Work light LEDs
OPERATION
WARNING! Make sure the ON/OFF switch (c) for the tool is in
the OFF position before connecting the power supply cord to
a power outlet.
Letter references in parenthesis (A) refer to the included
Identification Key.

BEFORE EACH USE

1. Clear the work area of combustible or flammable materials.
2. Make sure the work area is well ventilated, as there may be
toxic or irritating fumes.
3. Wet the soldering iron sponge (F).
4. File off any dirt, rust or paint on the part you wish to solder.
SOLDERING IRON OPERATION
1. Remove the soldering iron from the stand.
2. Press the power button (C). The status LED (B) will turn red.
2.1 The status LED will flash red twice if there is a problem
with the battery. Have the tool examined by a service
technician.
Visit www.princessauto.com for more information
4V CORDLESS SOLD ERING IRON 8968299
7