Adjustments - Little Wonder OPTIMAX 9270-12-01 Manuel Du Propriétaire

Fiche technique
ET 04380

ADJUSTMENTS

DEFLECTOR LEVER
If the horizontal deflector door during operation, tighten
the deflector lever pivot bolt to increase the tension on
the friction washers. just enough to keep the deflec-
tor in place. DO NOT over tighten, the handle tube
could crush.
HORIZONTAL DEFLECTOR
Adjust the jam nuts on the cable fitting so the deflector
door is completely closed when the deflector lever is
moved all the way forward. (Figure 1)
14
PROTOUMAT - 35 route de Colmar, 67600 Sélestat
SIRET : 444 448 898 00015
DEFLECTOR CHAIN
The sprocket needs to be installed on the deflec-
tor as shown. The chain consists of 2 master links,
6 roller links, and 5 pin links. The middle pin link
should be over the center tooth of the sprocket.
(Figure 2)
If large amounts of adjustment are required, the
chain can be moved one pitch on the sprocket to
gain 1/2" of adjustment.
FIGURE 1
FIGURE 2
Tél. : 03 88 08 65 06
Fax : 03 88 08 67 39
LITTLE
WONDER
BLOWER
contact@protoumat.fr
www.protoumat.fr
56