Publicité
Les langues disponibles
Les langues disponibles
After welding / soldering Without bellows / bellows at top.
28
Operating instructions
Phone +49 4531 509-0
Place new seal on anti-rotation
device
Fit top work
Do not damage seal
Screw stem as far as possible into
top work.
Caution: Left-hand thread
Check for ease of movement
Insert seal
Insert the pre-attached hollow stem
subassembly into the housing.
Screw stem as far upwards into the
top work as possible so that the
cone is not resting in the housing.
Check for the correct placement of
the seals.
Do not damage seal
Publicité
