Attaching The Covers - Epson EB-460i Guide D'installation

7. Attaching the Covers

A
Attach the wall plate cover and end cap
(1) Secure the wall plate cover with the two M4 x 12 mm hexagon socket head cap bolts (
Depending on how the cables are wired, you may need to cut out parts of the wall
q
plate cover to allow the cables to be passed through it.
(2) Place the end cap with the concave portion facing up (
End cap
B
Attach the cable cover to the projector
Attach the cable cover and tighten the two screws to secure the cable cover.
Only a specialist should remove or reinstall the projector, including for maintenance and
repairs. Refer to the User's Guide of your projector for instructions on maintenance and repairs.
Wall plate cover
Cable cover
21
B
).
M4 x 12 mm
hexagon socket head
cap bolts (2)
Screws (2)
A
).